ClearAccess Login – Default Username And Password

Default Password – admin

Follow these steps to access your ClearAccess router.

Step 1: Connect to the router

Connect your computer, laptop, or mobile device to the ClearAccess router.

You can use:

• Wi-Fi
• Ethernet/LAN cable

For configuration changes, an Ethernet connection is preferable because it reduces the possibility of losing the connection while saving settings.

Step 2: Open a browser

Open any modern browser such as:

• Google Chrome
• Microsoft Edge
• Mozilla Firefox
• Safari
• Opera

Step 3: Enter the router IP

Type this into the browser’s address bar:

192.168.1.1

Do not enter it into Google Search.

Step 4: Enter your credentials

Try:

Username: admin
Password: admin

Step 5: Click Login

After successful authentication, you should see the ClearAccess router administration interface.

From there, available options depend on the model and firmware.

1. 192.168.1.1 Doesn’t Open

First make sure your device is connected to the ClearAccess router.

Then try:

http://192.168.1.1

If it still doesn’t open, the router may be using a different gateway address.

Find the actual gateway

Windows:

1. Press Windows + R
2. Type cmd
3. Press Enter
4. Type:

ipconfig

5. Look for:

Default Gateway

That address is normally the address you should enter into your browser.

---

2. Username or Password Is Incorrect

If admin / admin doesn’t work:

• Check the sticker on the router.
• Check the manual.
• Check whether your ISP changed the credentials.
• Make sure Caps Lock isn’t enabled.
• Make sure you’re using the router administrator password, not necessarily the Wi-Fi password.

Router login credentials and Wi-Fi credentials are not necessarily the same thing.

---

3. You Forgot the Admin Password

If you previously changed the administrator password and cannot remember it, a factory reset may be necessary.

Look for the small Reset button on the router.

A reset generally restores factory settings, but it can also erase customized configuration, including ISP/network settings. Therefore, don’t reset the router unless you understand what configuration will need to be restored.

What is the ClearAccess default IP address?

The most commonly documented ClearAccess default IP address is:

192.168.1.1

What is the ClearAccess default username?

The commonly reported default username is:

admin

What is the ClearAccess default password?

The commonly reported default password is:

admin

How do I log into ClearAccess?

Connect to the router, open a browser, go to 192.168.1.1, and enter the router’s administrator credentials.

What if admin/admin doesn’t work?

Check the router’s label and documentation first. The ISP or previous administrator may have changed the credentials.

Can I log in using my phone?

Yes. Connect your phone to the router’s Wi-Fi network and open the router’s gateway address in a browser.

Do I need internet access to open 192.168.1.1?

Usually, no. The router’s local administration page can normally be accessed while connected to the router even if the internet connection itself is down.

Why does 192.168.1.1 show a different login page?

You may be connected to another router, access point, modem/router combination, or a network using a different gateway.

What is the ClearAccess EG30WV default login?

For the EG30WV, documented defaults are:

IP: 192.168.1.1
Username: admin
Password: admin

What is the ClearAccess SR300NE default IP?

Available references identify:

192.168.1.1

as the likely default IP for the SR300NE.

Item	Information
Brand	ClearAccess
Login IP	192.168.1.1
Default Username	admin
Default Password	admin
Login Method	Web browser
Connection	Wi-Fi / Ethernet
Common Model	EG30WV
Related Model	Smart RG SR300NE
Forgot Password	Check label/manual or factory reset
Main Purpose	Router administration
Wi-Fi Password	May differ from admin password